Moved to new blog
http://pysselilivet.blogspot.se/
Pyssel med en Storebro Commander 410
Friday 7 October 2016
Wednesday 5 October 2016
Blocking address change
If You missed it, and live in Sweden !
Now You can block unauthorized address change using Skatteverkets website. Just log on using some electronic identification and then register so its only possible to change Your adress, when moving in the future, using electronic identification.
Now You can block unauthorized address change using Skatteverkets website. Just log on using some electronic identification and then register so its only possible to change Your adress, when moving in the future, using electronic identification.
Wednesday 28 September 2016
Dishwasher servicecode 60
The PCB is mounted just below the buttons |
After some Googling I found some Guys who have had the same problem and it indicates overheating. It also seems that many modells from both Husqvarna and Electrolux shares the same control electronics.
So after some checking it was clear that the relay have burned and is continusly closed. The relay seems to aktivate the heater and therfore the overheating problem.
Thursday 22 September 2016
Reclosable Fastener, Velcro
Its a type of Velcro but there is no male/female part. Both parts are same
Many of the interior panels in our boat is attached with this fastener.
One application was that we wanted to hang the nice George Jensen gauges on the bulkhead/wall but, as said, didn't want to make any new screw holes. The solution was to make a mahogany plate with the screws and then attach the plate with Dual lock to the wall. In order to have the plate close to the wall a cavity was made on the backside of the plate. The cavity was made with a router.
The nameplates are also attached to the boat with Dual Lock
Tuesday 20 September 2016
Creating HTML mail, Mac
Creating fancy HTML mail with Mac
Sometimes You really want to send out a fancy mail that hopefully receives by different operative systems and hardware in a similar way.
Sometimes You really want to send out a fancy mail that hopefully receives by different operative systems and hardware in a similar way.
- Start with editing Your source in Your favourite editor, could be MS Word, and then save it as WEB page/HTML.
- Then right click on it and open it with Safari.
- In Safari, File - Share - Mail contents of this page.
- This opens up Mac Mail.
- In Mac Mail be sure "Send Web Content" is set to "Web Page"
- Enter the recipients and click Send
In Word it is simple to edit pictures and even add weblinks to pictures and text. This editing will "transfered" all the way to the mail.
Monday 29 August 2016
Refurbish nameplates
Refurbish the Storebro Commander nameplates.
The nameplates are manufactured by using a router, carving out the characters/lines, and then the entire plate is painted with a white paint. After that they are sanded so that the white colour only remains in the characters/lines and then afterwards the plate is finished with several coats of clear varnish. The problem is that the sharp edge between the characters and the surface makes that the varnish doesn't becomes thick enough, because of the surface tension. After some years the varnish cracks, at the sharp edges, and the moist raises the varnish and
You have a problem.
Removing, sanding away, the old varnish from the surface was made by the guys at Inredo, who have the right tools. I removed the varnish at the edges of the plates by a hot air gun, spatula and sandpaper.
The only way to make the varnish last longer is to is to round off all the sharp edges. This was made by a mini drill and sandpaper
After sanding the plates, 340 grit, they where stained with Internationals mahogany stain in 3 layers.
The first picture shows the difference with no tint and one treatment with tint.
Then the final touch with 16 layers of clear car varnish was made by JSA Lack, and it looks even better in real life than on the picture
The nameplates are manufactured by using a router, carving out the characters/lines, and then the entire plate is painted with a white paint. After that they are sanded so that the white colour only remains in the characters/lines and then afterwards the plate is finished with several coats of clear varnish. The problem is that the sharp edge between the characters and the surface makes that the varnish doesn't becomes thick enough, because of the surface tension. After some years the varnish cracks, at the sharp edges, and the moist raises the varnish and
You have a problem.
Removing, sanding away, the old varnish from the surface was made by the guys at Inredo, who have the right tools. I removed the varnish at the edges of the plates by a hot air gun, spatula and sandpaper.
The only way to make the varnish last longer is to is to round off all the sharp edges. This was made by a mini drill and sandpaper
After sanding the plates, 340 grit, they where stained with Internationals mahogany stain in 3 layers.
The first picture shows the difference with no tint and one treatment with tint.
Then the final touch with 16 layers of clear car varnish was made by JSA Lack, and it looks even better in real life than on the picture
Tuesday 23 August 2016
Hinge Jabsco toilet
Replacing hinge for Jabsco toilet, 37045-1092, lid
Sometimes it's easy maintenance, but the hardest thing is to find the right parts. After some Googling I found the part at Hjertmans with the Jabsco sparepart number 29098-2000
Sometimes it's easy maintenance, but the hardest thing is to find the right parts. After some Googling I found the part at Hjertmans with the Jabsco sparepart number 29098-2000
Subscribe to:
Posts (Atom)